Delta AP200 Uživatelský manuál stáhnout pdf (Strana 11)

3. Remove inner bag filter (J) Fig. 19, in the same

manner.

Fig. 19

4. The first stage filter (H) Fig. 18, can be replaced or

cleaned depending on its condition. This filter can be

cleaned in one of two methods: a shop-vac can be used

to remove the dust, or compressed air can be used to

blow the dust out of the filter.

WARNING: COMPRESSED AIR CAN BE

DANGEROUS. FOR OPERATOR SAFETY, DO NOT

EXCEED AN AIR PRESSURE OF 30 PSI OR POINT AIR

NOZZLE TOWARD ANYONE OR AIM AIR NOZZLE AT

YOUR OWN BODY. ALWAYS WEAR SAFETY GLASSES

AND DUST MASK WHEN PERFORMING THIS

PROCEDURE.

5. The inner bag filter (J) Fig. 19, cannot be cleaned; it

is disposable and must be replaced.

6. Install both filters in the reverse order in which they

were removed. NOTE: Make certain the AIR FLOW

ARROW on each filter is pointing inward toward the

rear of the air cleaner, as illustrated in Fig. 19.

Air Flow

1 2 ... 6 7 8 9 10 11 12

Žádné komentáře

Delta AP200 Uživatelský manuál Strana 11