Delta SS350LS Provozní pokyny Strana 16

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 19
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 15
16
CHANGING BLADES
Disconnect machine from power source.
1. Remove table insert (A) Fig. 22, and release blade tension
by pulling tension lever (B) forward, as shown.
2. Push upper blade chuck locking lever (C) Fig. 23, to the
rear as shown. This will release the blade (D) from the
upper chuck (E).
3. Remove the dust collection cup (A) by rotating knob
(B) 90° as shown in Fig. 24. Slide dust cup out of the
guides (C) by pulling it toward the front. NOTE: DO
NOT OPERATE THE UNIT WITH THE DUST CUP
REMOVED.
4. Push lower blade chuck locking lever (F) Fig. 25, to the
rear as shown. This will release the blade (G) from the
lower chuck (H).
Fig. 22
A
B
Fig. 23
E
C
D
Fig. 24
B
A
Fig. 25
F
G
H
Zobrazit stránku 15
1 2 ... 11 12 13 14 15 16 17 18 19

Komentáře k této Příručce

Žádné komentáře