Delta RMC101 Uživatelský manuál stáhnout pdf (Strana 201)

100

101

Speed Control 4.6

Controller Features 4-15

Gearing to a manually-guided voltage such as a joystick often results in rough motion due to

mechanical jitter and friction in the potentiometer itself. Therefore, the jaggedness of the previous

graph can be reduced by applying the Filter Time Constant.

This may be all that is necessary in this application. However, if it is possible for the user to move the

joystick too quickly, then the Velocity and Acceleration Limits can be used as in the first example to

prevent over-speed conditions. The Reference Deadband can be used to hold the Target Position

steady when the reference input is at rest.

4.6 Speed Control

The RMC100 provides two modes of closed loop speed control:

• Speed Control with Position Loop

This mode performs closed loop control on the axis position (not speed). To achieve speed

control, the RMC100 generates a target that moves at the commanded speed. This means that

if the Actual Position of the axis falls behind the Target Position, the RMC100 will attempt to

catch up to the moving Target Position, requiring the axis to move at a speed much higher than

the commanded speed. This may be undesirable in certain applications.

• Speed Control with Velocity Loop

This mode performs closed loop control on the axis speed. If the Actual Speed of the axis falls

behind the Target Speed, the RMC100 will attempt to catch up to the Target Speed.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 950 951

Komentáře k této Příručce

Žádné komentáře

Delta RMC101 Uživatelský manuál Strana 201

Komentáře k této Příručce

Související produkty a manuály pro Senzory Delta RMC101